System M Pivot Hinge with 40mm Backset Top Pivot TP-10
Finish: Stainless Steel & Black
Model selector
To ensure the pivot hinge provides the appropriate movement for your door, System M is available in six models suited to the weight and width of the door.
Downloads
System M, our self-closing pivot hinge, offers you absolute control over the movement of your pivot door. With just the touch of a finger, the pivot door is set into a single fluid motion. Opening the door is effortless and controlled, the movement elegant and the closing as soft as a whisper.
- Self-closing pivot hinge
- Damper Control (soft close and wall protection)
- Hold positions at 0˚, 90˚and -90˚
- For double- and single-acting doors
Model selector
To ensure the pivot hinge provides the appropriate movement for your door, System M is available in six models suited to the weight and width of the door.
Load-bearing capacity
System M is suitable for both light and heavy pivot doors covering a range between 20 and 350 kg.
Minimum door thickness
40 mm
Minimum-installation dimensions around the door:
Below: 11 mm Above: Minimum 4 mm, maximum 10 mm
Door/closing side:
Hold positions
0˚, 90˚ and -90˚
Minimum distance from the pivot point to the side of the door
91 mm.
Maximum door dimensions
Unrestricted up to a maximum weight of 500 kg
For any type of pivot door
FritsJurgens System M is suitable for any type of pivot doors (interior and exterior pivot doors)
Floating floors / suspended ceilings
It is possible to fit a pivot door if the floor plate or ceiling plate is connected to the structural subfloor or ceiling.